Industrial T Shape Joint 3Mm Hollow Section Auto Compression Welding Equipment
Product Introduction:
If you are producing galvanized fittings with T-shaped structures - such as guardrails, shelves, brackets, display stands - this fixed T-shaped welding machine is tailor-made for you. It is specifically designed for hollow galvanized pipes with specifications of 3mm+3mm, using a three head structure with two vertical heads and one horizontal head. After manual feeding, it automatically completes T-shaped welding. During the welding process, sparks only appear at the contact between pipes, while the pipe surface in contact with the fixture is intact and undamaged. The finished product only needs to be lightly polished and directly enters the next process or packaged for shipment.
Features:
1. The three electrode heads are designed with modular quick disassembly, which can be replaced separately after wear and tear, without the need to replace the entire set of fixtures, resulting in low maintenance costs.
2. The oxide layer or carbon deposits on the surface of the electrode head can be quickly cleaned with fine sandpaper or file, and the conductivity can be restored within 2 minutes, making maintenance easy.
3. The pneumatic system is equipped with an oil mist device and a filter, which automatically lubricates the cylinder and filters out moisture and impurities in the compressed air, extending the life of the pneumatic components.
4. The main components inside the control box are designed to be plug-in, allowing for direct module replacement after troubleshooting, significantly reducing equipment downtime.
5. The equipment comes standard with self diagnostic function, which can display fault codes and prompt possible causes. Maintenance personnel can quickly locate problems without professional knowledge.
Technical Parameters:
| Item/Model |
|
DN-40 |
DN-63 |
D(T)N-80 |
D(T)N-100 |
D(T)N-125 |
D(T)N-160 |
D(T)N-200 |
| Rated power At 50% |
KVA |
40 |
63 |
80 |
100 |
125 |
160 |
200 |
| Rated primary power |
V |
380 |
380 |
380 |
380 |
380 |
380 |
380 |
| Secondary Voltage |
V |
5.2 |
6.7 |
7.9 |
8.3 |
8.6 |
9.1 |
10.6 |
| Rated frequency |
HZ |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
| Max.Short Circuit Current |
KA |
14 |
15 |
16 |
18 |
20 |
28 |
34 |
| Max. weld power |
KVA |
62 |
86 |
170 |
280 |
300 |
330 |
410 |
| Throat |
MM |
500 |
500 |
630 |
630 |
630 |
630 |
630 |
| Max.Froce at electrodes |
N |
6000 |
6000 |
10000 |
10000 |
10000 |
12000 |
12000 |
| Working stroke |
MM |
20 |
20 |
30 |
40 |
40 |
50 |
50 |
| Cooling Water Consumpion 2.5bar |
L/min |
6 |
6 |
8 |
8 |
8 |
10 |
10 |
| Electrodes tlp |
MM |
Φ13*45 |
Φ13*45 |
Φ16*45 |
Φ16*45 |
Φ16*45 |
Φ20*45 |
Φ20*45 |
| Arms |
MM |
Φ50*150 |
Φ50*150 |
Φ80*220 |
Φ80*220 |
Φ80*220 |
Φ80*220 |
Φ80*220 |
| Projection Clamping Plate |
MM |
125*125 |
125*125 |
200*200 |
200*200 |
200*200 |
200*200 |
200*200 |
|
Max.Welding Capaciry A3 steel
|
MM |
2.5+2.5 |
3+3 |
4+4 |
4.5+4.5 |
5+5 |
5+5 |
6+6
|
General Structures:
Detailed Images:
CuCrZr Electrodes: The machine adopts three chromium zirconium copper alloy electrode heads, three chromium zirconium copper electrode heads (vertical up and down+horizontal), conductive and wear-resistant, quick disassembly design, and the pipe surface is intact during welding.
Cylinder:The cylinder adopts a combination of aluminum alloy cylinder barrel, low damping sealing ring, and light friction ring, with wear-resistant surface and long service life, achieving extremely high spot welding speed, electrode pressurization, smooth and fast.
Gas Storage Tanks: The projection welding machine is equipped with a dedicated gas storage tank, which is beneficial for reducing welding pressure fluctuations and ensuring stable welding force.
Waterway Components: All waterway components undergo surface treatment to prevent rusting, and waterway drainage is independently discharged to the water tank. Based on the outflow situation, blockages in the waterway can be observed and eliminated.
Scene Images:
Welding Test:
FAQ:
1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized machines should be more than 25 days.
2.Do you inspect the finished products?
Yes, each step of production products will be came out inspection by QC department before shipping.
3.Are you factory?
Yes, we are factory, all machine is made by ourself and we can provide customize service according to your requirement.
4.How to buy your Spot Welder?
Please send us inquiry to our email, and we will give you a PI to send us payment.
5. How to contact you?
You can send a mail for us and call us.
6.How will you deliver my goods to me?
We always ship by air and sea in the mean time.
7.How about your transport packing? Is it possible to damage the machine during the transportation?
We have rich experience on international transportation. All the packing are extra thickness carton filling with protective PE foam and waterproof membrane. No damage happened during transportation until now.
8.What kind of payment do you accept?
T/T, Western Union, PayPal, .L/C, D/A, etc.
Company Profile:
|
|
Industrial T Shape Joint 3Mm Hollow Section Auto Compression Welding Equipment Images
|
